- UniMachines
- ›
- Mechanical Presses
- ›
- Eccentric Presses
- ›
- Eccentric Presses Warszawska Fabryka Obrabiarek
- ›
- Eccentric Presses Warszawska Fabryka Obrabiarek PMS 63 CP
Eccentric Press Warszawska Fabryka Obrabiarek PMS 63 CP
| Category | Mechanical Presses Warszawska Fabryka Obrabiarek › |
| Manufacturer | Warszawska Fabryka Obrabiarek › |
ARCHIVED AD
Eccentric Press Warszawska Fabryka Obrabiarek PMS 63 CP was manufactured by the machine manufacturer Warszawska Fabryka Obrabiarek. Machine Warszawska Fabryka Obrabiarek PMS 63 CP was built in 1983 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1983 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 63 t |
| Length of the bottom working table | 800 mm |
| Width of the bottom working table | 560 mm |
| Throat depth (distance from the frame to the slider axis) | 280 mm |
| Maximum number of strokes per minute (manual work) | 65 1/min |
| Maximum number of strokes per minute (automatic work) | 110 1/min |
| Adjustment of the slider | 90 mm |
| Maximum distance between the table and the slider (at the lower position of the slider) | 315 mm |
| Thickness of the bolster plate | 90 mm |
| Power demand | 5.5 kW |
| Compressed air pressure | 0.441299 MPa |
| Diameter of the hole in the working table | 280 mm |
| Diameter of the hole in the bolster plate | 140 mm |
| Machine height | 2650 mm |
| Machine length | 1550 mm |
| Machine width | 1400 mm |
| Machine weight | 6.2 t |
Equipment | |
|---|---|
| Technical documentation | |
