- UniMachines
- ›
- Mechanical Presses
- ›
- Eccentric Presses
- ›
- Eccentric Presses ZAMECH
- ›
- Eccentric Presses ZAMECH PMS 160
Eccentric Press ZAMECH PMS 160
Eccentric Press ZAMECH PMS 160 was manufactured by the machine manufacturer ZAMECH. Machine ZAMECH PMS 160 was built in 1969 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1969 |
| Warranty | Without warranty |
| Technical condition | Good |
| Loading | The seller organizes the loading - included in the price of the machine |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 160 t |
| Length of the bottom working table | 1140 mm |
| Width of the bottom working table | 760 mm |
| Throat depth (distance from the frame to the slider axis) | 400 mm |
| Minimum length of the slider stroke | 20 mm |
| Maximum length of the slider stroke | 140 mm |
| Adjustment of the slider | 120 mm |
| Maximum distance between the table and the slider (at the lower position of the slider) | 580 mm |
| Thickness of the bolster plate | 125 mm |
| Power demand | 1.1 kW |
| Compressed air pressure | 0.577553 MPa |
| Diameter of the hole in the working table | 490 mm |
| Diameter of the hole in the bolster plate | 250 mm |
| Machine height | 3390 mm |
| Machine length | 2000 mm |
| Machine width | 2325 mm |
| Machine weight | 14.1 t |
Equipment | |
|---|---|
| Central lubrication | |
| Lighting | |
| Technical documentation | |
