- UniMachines
- ›
- Injection Molding Machines
- ›
- Plastics Injection Molding Machines
- ›
- Plastics Injection Molding Machines DEMAG
- ›
- Plastics Injection Molding Machines DEMAG Demag ergotech 350/810-2300 NC 4
Plastics Injection Molding Machine DEMAG Demag ergotech 350/810-2300 NC 4
Plastics Injection Molding Machine DEMAG Demag ergotech 350/810-2300 NC 4 was manufactured by the machine manufacturer DEMAG. Machine DEMAG Demag ergotech 350/810-2300 NC 4 was built in 2003 year.
General data | |
|---|---|
| Location | Czech Republic |
| region | Středočeský kraj |
| Year of manufacture | 2003 |
| Warranty | Without warranty |
| Technical condition | Good |
| Loading | The buyer organizes the loading at his own cost |
| Payment | At receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
| Stock number | 87410018 |
Technical parameters | |
|---|---|
| Clamping force | 356.9 t |
| Injection capacity | 1212 cm3 |
| Injection weight | 1090 g |
| Minimum distance between the plates for mounting the mold | 1530 mm |
| Maximum distance between the plates for mounting the mold | 820 mm |
| Height of the plate for mounting the mold | 1200 mm |
| Width of the plate for mounting the mold | 1100 mm |
| Distance between the columns (horizontal) | 810 mm |
| Distance between the columns (vertical) | 710 mm |
| Power of the ejector | 9.8 t |
| Length of the ejector stroke | 230 mm |
| Screw diameter | 70 mm |
| Length of the screw stroke | 315 mm |
| Maximum injection pressure | 187.7 MPa |
| Pump power | 55 kW |
| Oil tank capacity | 730 l |
| Total power demand | 72 kW |
| Length of the stroke of the injection nozzle | 620 mm |
| Pressure force of the injection nozzle | 11.2 t |
| Machine length | 7800 mm |
| Machine width | 2200 mm |
| Machine height | 4500 mm |
| Weight of the injection molding machine | 20000 t |
Equipment | |
|---|---|
| Cores | |
| Robot for finished parts | |
