- UniMachines
- ›
- Milling Machines
- ›
- Toolroom Milling Machines
- ›
- Toolroom Milling Machines MACMON
- ›
- Toolroom Milling Machines MACMON M 100 C
Toolroom Milling Machine MACMON M 100 C
Toolroom Milling Machine MACMON M 100 C was manufactured by the machine manufacturer MACMON. Machine MACMON M 100 C was built in 1969 year.
General data | |
|---|---|
| Location | Germany |
| Year of manufacture | 1969 |
| Warranty | Without warranty |
| Technical condition | Good |
| Loading | The seller organizes the loading - included in the price of the machine |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Length of the working table | 600 mm |
| Width of the working table | 215 mm |
| Minimum rotary speed of the vertical spindle | 100 1/min |
| Maximum rotary speed of the vertical spindle | 2500 1/min |
| Travel length X-axis (mechanical feed) | 310 mm |
| Travel length Y-axis (mechanical feed) | 170 mm |
| Travel length Z-axis (mechanical feed) | 340 mm |
| Maximum feed rate in X-axis | 7.5 mm/s |
| Maximum feed rate in Z-axis | 7.5 mm/s |
| Minimum rotary speed of the horizontal spindle | 40 1/min |
| Maximum rotary speed of the horizontal spindle | 2000 1/min |
| Travel length X-axis (hand feed) | 340 mm |
| Travel length Y-axis (hand feed) | 170 mm |
| Travel length Z-axis (hand feed) | 340 mm |
| Minimum feed rate in X-axis | 0.15 mm/s |
| Minimum feed rate in Z-axis | 0.15 mm/s |
| Machine weight | 0.86 t |
Equipment | |
|---|---|
| Swivel head (2 axis) | |
| Quill feed | |
| Mechanical drive of the quill | |
| Automatic feed in the axis Z | |
| Flat machine vice | |
| Central lubrication | |
| Liquid cooling system | |
