- UniMachines
- ›
- Punching Machines for sheet metal
- ›
- Turret Punch Presses
- ›
- Turret Punch Presses AMADA
- ›
- Turret Punch Presses AMADA AC 255NT
Turret Punch Press AMADA AC 255NT
Turret Punch Press AMADA AC 255NT was manufactured by the machine manufacturer AMADA. Machine AMADA AC 255NT was built in 2007 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2007 |
| Warranty | Without warranty |
| Technical condition | Very good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 20 t |
| Maximum thickness of the sheet metal | 3.2 mm |
| Maximum travel length X-axis | 1270 mm |
| Maximum travel length Y-axis | 1270 mm |
| Maximum length of the sheet metal (X) | 1270 mm |
| Maximum width of the sheet metal (Y) | 2500 mm |
| Maximum table load (evenly distributed) | 150 kg |
| Maximum rotary speed of the turret | 30 1/min |
| Maximum feed rate in X-axis | 80 m/min |
| Maximum feed rate in Y-axis | 60 m/min |
| Total power demand | 19 kW |
| Compressed air pressure | 0.5 MPa |
| Machine height | 3028 mm |
| Machine length | 4100 mm |
| Machine width | 2560 mm |
| Machine weight | 12 t |
Equipment | |
|---|---|
| Servo-electric slider drive | |
| Technical documentation | |
